Volvo Engine D13F Fault Code: SID 22 FMI 2 Timing Sensor, Crank
Volvo Engine D13F Fault Code: SID 22 FMI 2 Timing Sensor, Crank
CONTROL UNIT:
Engine ECU
DETECTION CONDITIONS:
The engine control unit (E-ECU) registers intermittent signal loss or signal error.
SYMPTOM:
1. Engine runs rough/varying engine speed.
2. Misfiring.
3. Engine is difficult to start, only after a long time of cranking.
4. Fuel consumption higher than normal.
POSSIBLE CAUSES:
1. Electric interference on speed signal.
2. Loose connection.
3. Poor insulation or defective cable.
4. Incorrectly installed sensor.
5. Defective sensor.
6. Damaged gear teeth on flywheel.
![JOHN DEERE PARTS ADVISOR & HITACHI 2.24.2 [2023.07] - ECUFORCETRUCK EPC](https://www.ecuforcetruck.com/wp-content/uploads/2023/09/1-300x300.png)
