Volvo Engine D13F Fault Code: SID 22 FMI 2 Timing Sensor, Crank
Volvo Engine D13F Fault Code: SID 22 FMI 2 Timing Sensor, Crank
CONTROL UNIT:
Engine ECU
DETECTION CONDITIONS:
The engine control unit (E-ECU) registers intermittent signal loss or signal error.
SYMPTOM:
1. Engine runs rough/varying engine speed.
2. Misfiring.
3. Engine is difficult to start, only after a long time of cranking.
4. Fuel consumption higher than normal.
POSSIBLE CAUSES:
1. Electric interference on speed signal.
2. Loose connection.
3. Poor insulation or defective cable.
4. Incorrectly installed sensor.
5. Defective sensor.
6. Damaged gear teeth on flywheel.
-
PF Diagnose 2.0.2.23 Diagnostics Software 2013 – Full Heavy & Medium Duty with OBDII Support – Online Installation Service
PF Diagnose $60.00Rated 0 out of 5 -
download Hitachi Construction Machinery MPDr Ver 3.7.0.0 [10.2020] Diagnostic Software
Hitachi $76.00Rated 0 out of 5