The EGR Valve operation is controlled by the Engine Control Module (ECM) using a pulse width modulated signal.? The ECU provides both the power and ground circuits. The EGR Valve assembly consists of a solenoid, operating a valve by hydraulic pressure provided by the engine?s oiling system.

Conditions for diagnostic trouble code (DTC):
1) EGR valve activated
2) Open circuit, current draw less than 500?mA

Observable symptoms
1) Loss of power

Probable cause
1) Wires between EGR Valve and Engine Control Module (ECM)
2) EGR extension harness
3) Connector
4) EGR Valve

Detailed information
1) EGR valve commanded closed

Reviews

There are no reviews yet.

Be the first to review “Volvo All Engines (2010 Emissions) Fault Code: SPN 2791 FMI 5 PID: SID 146 Engine Exhaust Gas Recirculation (EGR) Valve Control”

Volvo All Engines (2010 Emissions) Fault Code: SPN 2791 FMI 5 PID: SID 146 Engine Exhaust Gas Recirculation (EGR) Valve Control

Reviews

Cumminmms Insiter 8.9 Diagnostic Software

JPRO Diagnostic Software Download 2024

AGCO EDT 2023 Electronic Diagnostic Tool 1.125

DOOSAN DMS 5 3.1 [2023.11] diagnostic software 1PC

CLAAS WebTIC Offline [11.2021] Service Information – ENGLISH Language

Nexiq eTechnician 2.0.7447 2020

Detroit BackDoor Password Generator V1 V2

NAVISTAR ENGINE CYLINDER PERFORMANCE ANALYZER V7.8.8.1

Allison DOC 2021 V2 (1PC)

HINO EPC 2018 TRUCKS / BUSES 2018 EPC PARTS CATALOG

PACCAR Electronic Service Analyst 5.4.3.0 SW files 27.03.2021 software trucks

NEXIQ eTechnician 2.1.7657.26963 + Patch 2020

CAT ET Electronic Technician 2019C

PF Diagnose 2.0.2.23 Diagnostics Software 2013 – Full Heavy & Medium Duty with OBDII Support – Online Installation Service

Noregon JPRO Commercial Fleet Diagnostics 2017 v3

Meritor Wabco Tool Box 12.9.1

MANUAL SERVICE DEUTZ AGROTRON 108-118-128

Cat Factory Password Generator 1.0 2019 WINDOWS 10

Bendix 6.16 ACom Diagnostics ( bendix software trucks )

Related products

Cummins ISB4.5 CM2150 Fault Code: 2182 PID: 478 SPN: 1072 FMI: 3 Engine Brake Actuator Driver 1 Circuit – Voltage Above Normal or Shorted to High Source.

Cummins ISB4.5 CM2150 Fault Code: 2371 PID: SPN: 1074 FMI: 3 Engine (Exhaust) Brake Driver Circuit – Voltage Above Normal or Shorted to High Source.

Cummins ISB4.5 CM2150 Fault Code: 2369 PID: SPN: 1074 FMI: 4 Engine (Exhaust) Brake Driver Circuit – Voltage Below Normal or Shorted to Low Source.

Cummins ISB4.5 CM2150 Fault Code: 3737 PID: SID 115 SPN: 1675 FMI: 11 Engine Starter Mode Overcrank Protection – Condition Exists.

Cummins ISB4.5 CM2150 Fault Code: 2322 PID: SID 64 SPN: 723 FMI: 2 Engine Camshaft Speed/Position Sensor – Data Erratic, Intermittent, or Incorrect.

Cummins ISB4.5 CM2150 Fault Code: 2963 PID: 110 SPN: 110 FMI: 0 Engine Coolant Temperature – Data Valid But Above Normal Operating Range – Least Severe Level.

Cummins ISB4.5 CM2150 Fault Code: 3735 PID: SPN: 2884 FMI: 9 Engine Auxiliary Governor Switch – Abnormal Update Rate.

Cummins ISB4.5 CM2150 Fault Code: 2367 PID: SID 80 SPN: 1073 FMI: 3 Engine Brake Actuator Driver Output 2 Circuit – Voltage Above Normal, or Shorted to High Source.

Cummins ISB4.5 CM2150 Fault Code: 2367 PID: SID 80 SPN: 1073 FMI: 3 Engine Brake Actuator Driver Output 2 Circuit – Voltage Above Normal or Shorted to High Source.

Cummins ISB4.5 CM2150 Fault Code: 2556 PID: SPN: 729 FMI: 4 Engine Intake Air Heater 1 Circuit – Voltage Below Normal or Shorted to Low Source.

Cummins ISB4.5 CM2150 Fault Code: 111 PID: 629 FMI:12 Engine Control Module Critical Internal Failure – Bad Intelligent Device or Component

Cummins ISB4.5 CM2150 Fault Code: 3541 PID: SPN: 51 FMI: 4 Engine Intake Throttle Actuator Position Sensor Circuit – Voltage Below Normal or Shorted to Low Source.

Cummins ISB4.5 CM2150 Fault Code: 322 PID: SID 6 SPN: 651 FMI: 5 Injector Solenoid Driver Cylinder 1 Circuit – Current Below Normal or Open Circuit.

Volvo Engine D11L (Tier 4) Fault Code: SID 21 FMI 8 Engine Position

PACCAR MX (2004 Emissions) Fault Code: P1167 Fuel Temperature – Data Valid but Too High, Least Severe

Volvo All Engines (2004 Emissions) Fault Code: PID 94 FMI 5 Fuel Pressure (FP) Sensor

Detroit DD16 GHG14 (2014-16) Fault Code: SPN 1071 FMI 3 (MCM, CPC) Fan Stage 2 Circuit Failed High

Detroit DD15 GHG14 (2014-16) Fault Code: SPN 3251 FMI 1 (ACM) Diesel Particulate Filter Pressure Out of Range Low

Volvo All Engines (2017 Emissions) Fault Code: P113100 PID: EMS Exhuast Aftertreatment Fuel Air Purge Valve Circuit Low

Volvo All Engines (2013 Emissions) Fault Code: P20B992 PID: ACM Reductant Heater “A” Control

Cummins X15 CM2350 X116B Performance Series (2018 & Newer) Fault Code: 3316 PID: SPN: 3242 FMI: 4 Aftertreatment Diesel Particulate Filter Intake Temperature Sensor Circuit- Voltage Below Normal or Shorted to Low Source

PACCAR PX-6 CM2150 (2007-09) Fault Code: 2813 PID: 146 SPN: 2791 FMI: 14 EGR Valve Control – Special Instructions. The EGR valve has been closed during regeneration of the aftertreatment diesel particulate filter.

Cummins ISB6.7 CM2150 (2007-09) Fault Code: 325 PID: SID 006 SPN: 656 FMI: 5 Injector Solenoid Driver Cylinder 6 Circuit – Current Below Normal or Open Circuit. High resistance or no current detected at cylinder 6 injector supply or return pin.

Detroit DD15 EPA10 (2010-13) Fault Code: SPN 1072 FMI 3 (MCM) Short to Battery Power Between Pin 1 on the Jake Brake Solenoid and Pin 66 on the Motor Control Module 120 Pin Connector

Cummins ISM CM870 (2003-06) Fault Code: 432 PID: S230 SPN: 558 FMI: 13/13 Accelerator Pedal Idle Validation Circuit – out of calibration. Voltage at idle validation on-idle and off-idle circuit does not match accelerator pedal position.

Detroit DD13 GHG14 (2014-16) Fault Code: SPN 5358 FMI 18 (MCM) Cylinder #1 Engine Smoothness Control/Quantity Excess

Cummins ISX15 CM2250 (2010-12) Fault Code: 3313 PID: SPN: 4765 FMI: 4 Aftertreatment Diesel Oxidation Catalyst Intake Temperature Sensor Circuit- Voltage Below Normal, or Shorted to Low Source

Cummins ISB CM850 (2003-06) Fault Code: 1911 PID: 157 SPN: 157 FMI: 0 Injector Metering Rail Number 1 Pressure – Data Valid But Above Normal Operating Range – Most Severe Level. Fuel pressure signal indicates that fuel pressure has exceeded the maximum limit for the given engine rating.

Detroit DD13 EPA10 (2010-13) Fault Code: SPN 2630 FMI 2 (MCM) Engine Air Temperature Plausibility Fault Out of Range (High Box)

Store

About

Features

Follow Us