PACCAR MX (2004 Emissions) Fault Code: P102C VTG Turbocharger Turbine – Malfunction
PACCAR MX (2004 Emissions) Fault Code: P102C VTG Turbocharger Turbine – Malfunction
SET CONDITIONS:
The PCI ECU (D420) detects that the turbine shaft of the VTG turbocharger is broken or stuck.
DIAGNOSTIC CONDITION:
This diagnostic runs:
1. When the engine is running and
2. No malfunctions are detected on the turbo speed sensor and boost pressure sensor.
CORRESPONDING OBD READINESS MONITOR:
None
RESET CONDITION:
This DTC changes to inactive when the fault is no longer detected.
REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back?
– No, repair successful
– Yes, repair unsuccessful
POSSIBLE CAUSES:
Malfunction on VTG turbocharger
ADDITIONAL INFORMATION:
For this diagnostic, the PCI ECU checks the likely readings from the turbo speed sensor (F683) and the boost pressure sensor (F802) for a certain engine speed and fuel injection quantity.
-
VOLVO PREMIUM TECH TOOL PTT 2.7.116 + APCI 2021 + devtool ( ONLINE )
Trucks software $80.00Rated 0 out of 5
Related products
-
SERVICE MANUAL DETROIT DIESE LDDEC VI – CPC Vehicle Interface Harness Schematic
DETROIT $15.00Rated 0 out of 5 -
SERVICE MANUAL INTERNATIONAL ENGINE VT365 (2003 & Older)
INTERNATIONAL ENGINES $24.00Rated 0 out of 5 -
SERVICE MANUAL International Engines MaxxForce DT 9 10 (2014 & Newer)
INTERNATIONAL ENGINES $17.00Rated 0 out of 5