PACCAR MX (2004 Emissions) Fault Code: P102C VTG Turbocharger Turbine – Malfunction
PACCAR MX (2004 Emissions) Fault Code: P102C VTG Turbocharger Turbine – Malfunction
SET CONDITIONS:
The PCI ECU (D420) detects that the turbine shaft of the VTG turbocharger is broken or stuck.
DIAGNOSTIC CONDITION:
This diagnostic runs:
1. When the engine is running and
2. No malfunctions are detected on the turbo speed sensor and boost pressure sensor.
CORRESPONDING OBD READINESS MONITOR:
None
RESET CONDITION:
This DTC changes to inactive when the fault is no longer detected.
REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back?
– No, repair successful
– Yes, repair unsuccessful
POSSIBLE CAUSES:
Malfunction on VTG turbocharger
ADDITIONAL INFORMATION:
For this diagnostic, the PCI ECU checks the likely readings from the turbo speed sensor (F683) and the boost pressure sensor (F802) for a certain engine speed and fuel injection quantity.
-
CAT CDVR PC Software – Caterpillar Digital Voltage Regulator (CDVR) WINDOWS 10
CAT $45.00Rated 0 out of 5 -
Scania SDP3 2.48.6 Diagnosis & Programming for VCI 3 VCI3 without Dongle
Scania $30.00Rated 0 out of 5
Related products
-
SERVICE MANUAL Carrie Starbird TDB/TDS-215 and Starbird PlusTDB/TDS-219
CARRIE $24.00Rated 0 out of 5 -
SERVICE MANUAL DETROIT DIESEL DDEC III-IV Single ECM Troubleshooting Guide
DETROIT $48.00Rated 0 out of 5