Detroit DD13 GHG14 (2014-16) Fault Code: SPN 3563 FMI 21 (MCM) Ambient And Inlet Manifold Pressure Difference (High Box)
DESCRIPTION:
This fault sets when ambient and inlet manifold pressure difference is out of range under a load.
MONITORED PARAMETER:
Inlet manifold pressure and barometric pressure.
TYPICAL ENABLING CONDITIONS:
1. Engine Speed (rpm)
– Min: 1350
– Max: 1800
2. Engine Torque
– Min: 1400 N·m
– Max: 3000 N·m
3. Intake Air Throttle Position
– Max: 5%
4. Engine Coolant Outlet Temperature
– 65°C (149°F)
MONITOR SEQUENCE:
None
EXECUTION FREQUENCY:
Continuous when enabling conditions met.
TYPICAL DURATION:
40 seconds
DASH LAMPS:
1. SEL
2. CEL
3. MIL
ENGINE REACTION:
25% Derate + Engine Shutdown.
VERIFICATION:
1. Once engine is at standard operating temperature.
2. Drive at highway speed with loaded trailer between 1350 to 1800 rpm continuously for five minutes.
PROBABLE CAUSES:
1. Failed inlet manifold pressure sensor.
2. Inlet manifold pressure sensor connector/harness.
3. Charge air cooler failure.
![download Hitachi Construction Machinery MPDr Ver 3.7.0.0 [10.2020] Diagnostic Software](https://www.ecuforcetruck.com/wp-content/uploads/2023/05/MPDR-3.7.00-300x300.png)
Related products
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1000 Class 2 Loss of Serial Data Communication
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0848 Transmission Pressure Switch Solenoid D Circuit High
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: U0031 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00 -
-
-
-
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0123 Pedal Position Sensor Circuit High Voltage
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1041 J1850 (Class 2) ABS Controller State of Health Failure
1000 & 2000 Gen 4 $50.00
