Volvo All Engines (2017 Emissions) Fault Code: P025900 PID: EMS Injection Pump Fuel Metering Control “B” High

Volvo All Engines (2017 Emissions) Fault Code: P025900 PID: EMS Injection Pump Fuel Metering Control “B” High

Fuel Injector operation is controlled by the Engine Control Module (ECM). The ECM provides a common supply voltage to injectors 1,2,3 (Bank 1) and there are individual output transistor drivers inside the ECM to control each individual injector’s ground circuits. There are two solenoid circuits within the injector; a Needle Control Valve and a Spill Valve. Although they are separate circuits, the same fault code is used to identify a fault in the Needle Control Valve circuit and/or the Spill Valve circuit.

Conditions for diagnostic trouble code (DTC):
1) Short circuit to voltage supply

Observable symptoms
1) Low Power
2) Engine runs unevenly or misfires
3) Abnormal noise
4) Engine is operating on only 3 or 5 cylinders

Probable cause
1) Wiring harness
2) Injector
3) Engine control module (ECM)