Volvo All Engines (2013 Emissions) Fault Code: P052400 PID: EMS Engine Oil Pressure Circuit Too Low

Volvo All Engines (2013 Emissions) Fault Code: P052400 PID: EMS Engine Oil Pressure Circuit Too Low

The Engine Oil Pressure Sensor is used to detect engine lubrication system failures. The sensor consists of a pressure sensitive diaphragm and amplifier. Engine oil pressure causes the sensor’s diaphragm to deflect and produce an electrical signal proportional to the pressure. The diaphragm deflection signal is amplified in the sensor.
The sensor’s signal is monitored by the Engine Control Module (ECM).
The engine control module (ECM) will set a diagnostic trouble code (DTC) and derate the engine to avoid engine damage if the sensor signal is not within predetermined limits, or the signal is not rational.

Conditions for diagnostic trouble code (DTC):
1) Oil pressure critically low

Observable symptoms
1) Low Power
2) Reduced engine output and engine switch-off if the vehicle speed falls below 3 km/h (2 mph) when engine protection is chosen in the data set

Probable cause
1) Low engine oil level (EOL)
2) Contaminated oil, slow flowing or too thin
3) Reduction valve
4) Worn oil pump
5) Engine oil pressure (EOP) sensor
6) Oil leakage