Volvo All Engines (2004 Emissions) Fault Code: PID 91 FMI 9 Pedal Message
Fault Condition: The Pedal Message code will set when the Engine Management System (EMS) Module has lost the Accelerator Pedal Sensor Signal from the Vehicle Electronic Control Unit (VECU).
Possible repairs:
1) Verify that code PID 91 is set. If code PID 91 is not set, wiggle the harness and connectors to try to set the code. Visually inspect the VECU connectors and wires for poor connections.
2) If code MID 144 PID 91 is set, repair code MID 144 PID 91 and retest the system. If only MID 128 PID 91 is set, the Vehicle Electronic Control Unit (VECU) may be faulty, call MACK Reliability Engineering.
Related products
-
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P1779 Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1300 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1301 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1000 Class 2 Loss of Serial Data Communication
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0873 Transmission Pressure Switch Solenoid E Circuit High
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P2771 Four-Wheel Drive Switch Circuit
1000 & 2000 Gen 4 $50.00 -
-
Bendix ABS EC-30 Fault Code: SID 251 FMI 3
Bendix ABS -
