PACCAR MX (2004 Emissions) Fault Code: U1409 VTG Turbocharger Actuator State – Data Erratic, Intermittent or Incorrect
PACCAR MX (2004 Emissions) Fault Code: U1409 VTG Turbocharger Actuator State – Data Erratic, Intermittent or Incorrect
SET CONDITIONS:
The PCI ECU (D420) receives a CAN message from the VTG turbocharger actuator (L037) that contains an out-of-range value for the actuator operating state.
DIAGNOSTIC CONDITION:
This diagnostic runs continuously when the ignition is on.
CORRESPONDING OBD READINESS MONITOR:
None
RESET CONDITION:
This DTC changes to inactive after the ignition is keyed off for at least 15 seconds and keyed on again, and the fault is no longer detected.
REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back?
– No, repair successful
– Yes, repair unsuccessful
POSSIBLE CAUSES:
1. This DTC can be a result of a VTG turbo charger actuator-related P-code. Troubleshooting these P-codes first.
2. Communication error between actuator and PCI ECU
3. Faulty VTG turbocharger actuator
ADDITIONAL INFORMATION:
The VTG turbocharger is controlled by the VTG turbocharger actuator, a smart actuator that communicates with the PCI ECU via E-CAN. The actuator ECU is controlled by the PCI ECU but has its own diagnostics.
