PACCAR MX (2004 Emissions) Fault Code: P1653 DtcShared.ViewModels.DtcInfoViewModel
PACCAR MX (2004 Emissions) Fault Code: P1653 DtcShared.ViewModels.DtcInfoViewModel
SET CONDITIONS:
This DTC is set when the ECU detects a lower voltage than expected on pin (B4) of the PCI ECU (D420).
DIAGNOSTIC CONDITION:
The diagnostic runs continuously when the ignition is keyed on.
CORRESPONDING OBD READINESS MONITOR:
None
RESET CONDITION:
The DTC changes to inactive after the diagnostic runs and passes.
REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back?
– No, repair successful
– Yes, repair unsuccessful
POSSIBLE CAUSES:
1. Wiring interrupted or short circuit to ground
2. Defective PCI ECU (D420)
![download Hitachi Construction Machinery MPDr Ver 3.7.0.0 [10.2020] Diagnostic Software](https://www.ecuforcetruck.com/wp-content/uploads/2023/05/MPDR-3.7.00-300x300.png)
