PACCAR MX (2004 Emissions) Fault Code: P1498 EGR Valve Position – Incorrect
PACCAR MX (2004 Emissions) Fault Code: P1498 EGR Valve Position – Incorrect
SET CONDITIONS:
The PCI ECU (D420) detects that the actual position of the EGR valve deviates too much from the requested position for more than 2 seconds.
DIAGNOSTIC CONDITION:
This diagnostic runs continuously while the engine is running, except when the engine is running in Engine mode ‘SCR Heating’.
CORRESPONDING OBD READINESS MONITOR:
None
RESET CONDITION:
The DTC changes to inactive after the diagnostic runs and passes.
REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back?
– No, repair successful
– Yes, repair unsuccessful
POSSIBLE CAUSES:
Bent connection rod between the valve and the actuator motor
Stuck EGR valve due to:
1. Contamination on the mechanism
2. Expansion/contraction of the valve housing due to sudden temperature differences (temporary situation)
-
CAT CDVR PC Software – Caterpillar Digital Voltage Regulator (CDVR) WINDOWS 10
CAT $45.00Rated 0 out of 5 -
JOHN DEERE SERVICE ADVISOR 5.3.225 DATABASE AG + CF ENGLISH 2023
John Deere $250.00Rated 0 out of 5
Related products
-
SERVICE MANUAL International Engines DT466 (2004-2006)
INTERNATIONAL ENGINES $45.00Rated 0 out of 5