PACCAR MX (2004 Emissions) Fault Code: P1180 Fuel Temperature – Data Valid but Too High, Moderately Severe
PACCAR MX (2004 Emissions) Fault Code: P1180 Fuel Temperature – Data Valid but Too High, Moderately Severe
SET CONDITIONS:
The PCI ECU (D420) detects that:
1. Fuel temperature is more than 95?C [203?F] and
2. Fuel pressure is too low and
3. Ambient temperature is more than 45?C [113?F] and
4. Fuel tank level is low
DIAGNOSTIC CONDITION:
This diagnostic runs continuously when the engine is running.
CORRESPONDING OBD READINESS MONITOR:
None
RESET CONDITION:
This DTC changes to inactive when the fault is no longer detected.
REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back?
– No, repair successful
– Yes, repair unsuccessful
POSSIBLE CAUSES:
Fuel is hot due to low fuel tank level and high ambient temperatures.
ADDITIONAL INFORMATION:
1. The low-pressure fuel pressure is measured by the fuel pressure sensor (F801).
2. The low-pressure fuel temperature is measured by the fuel temperature sensor (F803).
3. Engine torque is reduced.
-
PF Diagnose 2.0.2.23 Diagnostics Software 2013 – Full Heavy & Medium Duty with OBDII Support – Online Installation Service
PF Diagnose $60.00Rated 0 out of 5 -
Hino Diagnostic eXplorer 2 – Hino DX2 1.1.19.1 with keygen unlocked ( Hino trucks )
Hino $50.00Rated 0 out of 5
Related products
-
SERVICE MANUAL International Engines VT275 (2004 & Older)
INTERNATIONAL ENGINES $21.00Rated 0 out of 5