PACCAR MX (2004 Emissions) Fault Code: P060C Internal ECU Injector Power Generation – Malfunction
PACCAR MX (2004 Emissions) Fault Code: P060C Internal ECU Injector Power Generation – Malfunction
SET CONDITIONS:
The PCI ECU (D420) detects an internal error on the injector control.
DIAGNOSTIC CONDITION:
This diagnostic runs once after the ignition is keyed on.
CORRESPONDING OBD READINESS MONITOR:
None
RESET CONDITION:
This DTC changes to inactive when the fault is no longer detected.
REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back?
– No, repair successful
– Yes, repair unsuccessful
POSSIBLE CAUSES:
Clear the DTC with the diagnostic service tool. Start the engine and let it idle for at least 1 minute. If this DTC reoccurs, replace the ECU.
![DOOSAN DMS-5 3.1.3 [2023.11] diagnostic software](https://www.ecuforcetruck.com/wp-content/uploads/2023/11/1-300x300.png)
![JOHN DEERE PARTS ADVISOR & HITACHI 2.24.2 [2023.07] - ECUFORCETRUCK EPC](https://www.ecuforcetruck.com/wp-content/uploads/2023/09/1-300x300.png)
