Eaton Fuller Advantage (2017) Fault Code: 11 PID: SID 254 SPN: FMI: 12 No TECU Operation: Bad Intelligent Device
Overview:
The Fuller Advantage transmission is equipped with a Transmission Electronic Control Unit (TECU). The TECU performs a variety of functions including receiving inputs from sensors, sending outputs to control devices, operating X-Y Shifter motors and actuators and making shift decisions. Fault Code 11 indicates an internal failure of the TECU.
Detection:
The TECU performs a self-check during power up, any failure detected sets this fault.
Conditions to Set Fault Code Active:
FMI 12 – Bad Intelligent Device: TECU detects an internal failure.
Fallback:
FMI 12
• “F” flashes in gear display.
• Service light flashes (if equipped).
• Engine may not crank.
• Transmission may not attempt to shift.
• Transmission may not confirm neutral.
• Engine may have to be shut down with transmission still in gear.
Conditions to Set Fault Code Inactive:
FMI 12: Transmission powers up and the failure is no longer detected by the TECU.
Possible Causes:
1) TECU
2) Internal failure
Related products
-
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0123 Pedal Position Sensor Circuit High Voltage
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1300 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0870 Transmission Pressure Switch Solenoid E Circuit
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0873 Transmission Pressure Switch Solenoid E Circuit High
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: U0032 J1850 (Class 2) Serial Data Communication Link High
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0122 Pedal Position Sensor Circuit Low Voltage
1000 & 2000 Gen 4 $50.00 -
