Detroit DD16 GHG14 (2014-16) Fault Code: SPN 5443 FMI 16 (ACM) DPF HC Absorption High
DESCRIPTION:
Fault code sets when the engine oil separator speed is less than 3,000 rpm for 45 seconds.
MONITORED PARAMETER:
DOC temperature in.
TYPICAL ENABLING CONDITIONS:
1. Engine Coolant Temperature Greater than 65°C (149°F).
2. Engine Oil Temperature Greater than 65°C (149°F).
3. Engine rpm Greater than 900 rpm.
4. Ambient Temperature Greater than -8°C (17.6°F).
5. Barometric Pressure Greater than 10.9 psi (755 mbar).
MONITOR SEQUENCE:
None
EXECUTION FREQUENCY:
None
TYPICAL DURATION:
45 seconds
DASH LAMPS:
None
ENGINE REACTION:
None
VERIFICATION:
Engine running for greater than one minute with the typical enabling conditions met
PROBABLE CAUSES:
Perform a stationary regen.
Related products
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0848 Transmission Pressure Switch Solenoid D Circuit High
1000 & 2000 Gen 4 $50.00 -
Bendix ABS EC-30 Fault Code: SID 251 FMI 3
Bendix ABS -
-
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P1779 Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P1688 Unmanaged Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0218 Transmission Fluid Over Temperature Condition
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P2773 Torque Control Request Ignored – ECM/TCM
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0873 Transmission Pressure Switch Solenoid E Circuit High
1000 & 2000 Gen 4 $50.00
