Detroit DD16 GHG14 (2014-16) Fault Code: SPN 1323 FMI 31 (MCM) Idle Smoothness Control/Cylinder #1 Misfire at Idle
DESCRIPTION:
This fault code sets when the motor control module (MCM) detects that cylinder #1 has low rpm speed with the injector commanded to max fueling for a count of two with all conditions met.
MONITORED PARAMETER:
Engine rpm
TYPICAL ENABLING CONDITIONS:
1. Engine speed steady between 600 to 950 rpm.
2. Engine coolant temperature between 65°C (149°F) and 114°C (237°F).
3. Engine fuel temperature between 0°C (32°F) and 150°C (302°F).
MONITOR SEQUENCE:
None
EXECUTION FREQUENCY:
Once per drive cycle when enabled conditions are met.
TYPICAL DURATION:
Five seconds
DASH LAMPS:
1. CEL
2. MIL
ENGINE REACTION:
25% Derate
VERIFICATION:
1. Ensure the ignitions has ben off for a minimum of 5 minutes prior to the last ignition on.
2. Meet all enabling conditions.
3. Let the engine idle for 5 minutes.
4. Fault code status will become pending with one detected failure and active with the second.
NOTE: Do not use the idle speed balance (ISB) test in the diagnostic service tool for any misfire at idle testing.
POSSIBLE CAUSES:
1. Valve lash out of adjustment.
2. Valve train damage/failure.
3. Bent Valve.
4. Valve face/seat damage.
5. Stuck Jake brake.
6. Bearing failure.
7. Bent connecting rod.
8. Cylinder liner damage.
9. Piston ring damage.
10. Failed cylinder head gasket.
11. Failed fuel injector.
PROBABLE CAUSES:
1. Cylinder kit failure.
2. Valve train failure.
3. Lash adjustments.
4. Fuel injector.
5. High pressure fuel line (rail to fuel injector).
6. Debris entering fuel injector.
7. Fuel quality.
Note: If 1322-31 active, fix that first.
-
premium volvo tech tool update 2.8.150 diagnostic software 1pc
Trucks software $150.00Rated 0 out of 5 -
10 IN 1 FOR CAT SIS Caterpillar 2021 Full Service Dealer INCLUDING CAT 2019 C
CAT $110.00Rated 0 out of 5 -
Detroit Diesel Diagnostic Link DDDL 8.0 PRO PROFESSIONAL Software trucks
Detroit $25.00Rated 0 out of 5
-
JOHN DEERE SERVICE ADVISOR 5.3.225 DATABASE AG + CF ENGLISH 2023
John Deere $250.00Rated 0 out of 5 -
International Truck ISIS – Oncommand Service Information Q4.2020 [04.2020]
Navistar $85.00Rated 0 out of 5 -
PACCAR Electronic Service Analyst 5.4.3.0 SW files 27.03.2021 software trucks
PACCAR $60.00Rated 0 out of 5 -
John Deere & Hitachi Parts ADVISOR 2020 [08.2020] Offline DVD Spare Parts Catalog
John Deere $120.00Rated 0 out of 5
Related products
-
Allison 1000 & 2000 Gen 4 Fault Codes: U2105 CAN Bus ECM Error
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 Fault Codes: U0073 CAN Bus Reset Counter Overrun
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0875 Transmission Reverse Pressure Switch Circuit Malfunction
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0871 Transmission Pressure Switch Solenoid E Circuit Stuck Open
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0847 Transmission Pressure Switch Solenoid D Circuit Stuck Closed
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 Fault Codes: P2771 Four-Wheel Drive Switch Circuit
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1016 Class 2 J1850 (Class 2) Powertrain Controller State of Health Failure
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 Fault Codes: P1779 Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 Fault Codes: U2104 CAN Bus Reset Counter Overrun
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0123 Pedal Position Sensor Circuit High Voltage
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1064 J1850 (Class 2) TBC Controller State of Health Failure
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 P0719 Brake Switch ABS Input Low
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 Fault Codes: P1891 Engine Throttle Position Sensor Pulse Width Modulation (PWM) Signal Low Input
1000 & 2000 Gen 4 $50.00Rated 0 out of 5 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1041 J1850 (Class 2) ABS Controller State of Health Failure
1000 & 2000 Gen 4 $50.00Rated 0 out of 5
-
SERVICE MANUAL 3000 AND 4000 SERIES GEN 4 GENERATION – ALLISON
Allison$19.00Original price was: $19.00.$17.00Current price is: $17.00.Rated 0 out of 5