Detroit DD16 EPA10 (2010-13) Fault Code: SPN 2791 FMI 10 (MCM) Exhaust Gas Recirculation Actuator Slow Response

DESCRIPTION:
Exhaust Gas Recirculation (EGR) Actuator Slow Response.

MONITORED PARAMETER:
EGR Mass Flow Gradient.

TYPICAL ENABLING CONDITIONS:
1. EGR in Closed-Loop Control.
2. EGR Flow Must Vary, CAC Outlet Temperature greater than 0°C (32°F).
3. Engine Speed 1200 to 2500 rpm, Engine Torque 500 to 2500 N·m.
4. Coolant Temperature greater than 65°C (149°F).
5. Ambient Temperature Greater Than -8°C (17.6°F) Ambient.
6. Barometric Pressure Greater Than 755 mbar.
7. Engine must have not been in regeneration mode for greater than Five minutes.

MONITOR SEQUENCE:
None

EXECUTION FREQUENCY:
Always Enabled

TYPICAL DURATION:
Five Seconds

DASH LAMPS:
MIL

ENGINE REACTION:
None

VERIFICATION:
1. When ambient temperature greater than -8°C (17.6°F).
2. Barometric pressure greater than 755 mbar.
3. Engine has not been in regeneration mode for greater than five minutes.
4. Warm up engine such that coolant temperature greater than 65°C (149°F).
5. Run vehicle.
6. Varying throttle to vary EGR flow.
7. Insuring engine is operating in closed-loop EGR control and CAC outlet temperature greater than 0°C (32°F).

PROBABLE CAUSES:
1. If any voltage codes exist, fix those first.
2. EGR valve actuator pull rod.
3. EGR actuator.
4. EGR valve.
5. Wiring between the EGR actuator harness and the ECM.