Detroit DD16 EPA07 (2007-09) Fault Code: SPN 2659 FMI 1 (MCM) Exhaust Gas Recirculation Flow Target Error (Low Flow)
NOTE: If codes 441-xx, 1636-xx, 2791-xx, 3563-xx, or 2630-xx are active, fix those first.
PROBABLE CAUSES:
1. Inspect the EGR and exhaust system for evidence of leaking.
2. Delta P sensor.
3. Delta P sensor ports.
4. Delta P sensor harness/connector.
5. Air inlet manifold pressure sensor.
6. Air inlet manifold pressure sensor connector/harness.
7. Remove the EGR cooler hot pipe, EGR crossover pipe, and the delivery pipe for excessive build up or blockage.
8. EGR valve failure.
Related products
-
Allison 1000 & 2000 Gen 4 Fault Codes: P1779 Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U0032 J1850 (Class 2) Serial Data Communication Link High
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P2771 Four-Wheel Drive Switch Circuit
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0218 Transmission Fluid Over Temperature Condition
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P2773 Torque Control Request Ignored – ECM/TCM
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P1688 Unmanaged Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0848 Transmission Pressure Switch Solenoid D Circuit High
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0122 Pedal Position Sensor Circuit Low Voltage
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1096 J1850 (Class 2) IPC Controller State of Health Failure
1000 & 2000 Gen 4 $50.00
