Detroit DD15 GHG14 (2014-16) Fault Code: SPN 168 FMI 0 (IPPC) Battery Plus Terminal 30 Voltage Too High
DESCRIPTION:
This fault code sets when the Integrated Predictive Powertrain Control (IPPC) module detects that the voltage on pin 1 is too high.
MONITORED PARAMETER:
Battery voltage
TYPICAL ENABLING CONDITIONS:
Ignition ON
MONITOR SEQUENCE:
Always
EXECUTION FREQUENCY:
Always
TYPICAL DURATION:
2 seconds
DASH LAMPS:
None
ENGINE REACTION:
None
VERIFICATION:
Start and Idle the Engine.
PROBABLE CAUSES:
1. Battery failure.
2. Battery cable failure.
3. Failed alternator.
Related products
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1041 J1850 (Class 2) ABS Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0876 Transmission Reverse Pressure Switch Circuit Stuck Open
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0873 Transmission Pressure Switch Solenoid E Circuit High
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1096 J1850 (Class 2) IPC Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0122 Pedal Position Sensor Circuit Low Voltage
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0123 Pedal Position Sensor Circuit High Voltage
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1064 J1850 (Class 2) TBC Controller State of Health Failure
1000 & 2000 Gen 4 $50.00
