Detroit DD15 EPA10 (2010-13) Fault Code: SPN 3720 FMI 15 (MCM, ACM) Diesel Particulate Filter Has Reached the End of its Service Life
IMPORTANT: Replace DPF and perform the Ash Accumulator reset using the diagnostic service tool.
NOTE: The DPF lamp will illuminate and code 3720/15 will log when the truck reaches the appropriate mileage interval. This fault indicates that the DPF needs to be replaced and the DPF Ash Accumulator routine in the diagnostic service tool must be completed. This routine can be found in the actions drop-down menu and must be completed after the DPF has been replaced.
NOTE: Using alternate cleaning methods may result in the cleaned DPF failing to reach the next ash clean interval. There may be damage to the Diesel Oxidation Catalyst (DOC) or DPF assemblies as a result of alternate cleaning methods.
NOTE: This code indicates the DPF has reached the end of its service life and must be replaced. Replace the DPF or attempt to have it cleaned.
Related products
-
Allison 1000 & 2000 Gen 4 Fault Codes: P1688 Unmanaged Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1301 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P2773 Torque Control Request Ignored – ECM/TCM
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1000 Class 2 Loss of Serial Data Communication
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1041 J1850 (Class 2) ABS Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0873 Transmission Pressure Switch Solenoid E Circuit High
1000 & 2000 Gen 4 $50.00 -
-
Bendix ABS EC-30 Fault Code: SID 251 FMI 3
Bendix ABS -
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P1779 Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
