Detroit DD13 GHG14 (2014-16) Fault Code: SPN 520261 FMI 31 (MCM) Speed Limitation Fault Due to Powertrain Monitoring Control
POSSIBLE CAUSES:
1. External fuel source.
2. Torque out of bounds.
3. Alternative fuel sources.
4. Add on devices, that are requesting torque modifications.
NOTE: Please see the step by step troubleshooting procedures for this specific code.
NOTE: This fault is caused by an external fuel source or torque out-of-bounds. Check injectors, alternative fuel sources, or add-on devices that may be requesting torque modifications.
PROBABLE CAUSES:
1. Check for failed cylinders/injector.
2. Reprogram the MCM with the latest version.
Related products
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1041 J1850 (Class 2) ABS Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0870 Transmission Pressure Switch Solenoid E Circuit
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U0031 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P2771 Four-Wheel Drive Switch Circuit
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P1779 Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1000 Class 2 Loss of Serial Data Communication
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0123 Pedal Position Sensor Circuit High Voltage
1000 & 2000 Gen 4 $50.00 -
