Detroit DD13 EPA10 (2010-13) Fault Code: SPN 1231 FMI 9 (MCM) Aftertreatment Control Module Message Not Received or Has Stopped Arriving

DESCRIPTION:
This fault code sets when the Motor Control Module (MCM) stops receiving messages from the Aftertreatment Control Module (ACM).

MONITORED PARAMETER:
ACM controller area network (CAN) communication.

TYPICAL ENABLING CONDITIONS:
Always enabled

MONITOR SEQUENCE:
None

EXECUTION FREQUENCY:
Always enabled

TYPICAL DURATION:
Two seconds

DASH LAMPS:
1. MIL is solid.
2. CEL and AWL Flash.

ENGINE REACTION:
30 seconds shutdown.

VERIFICATION:
1. Turn the ignition off.
2. Disconnector the USB link from the 9 – pin connector.
3. Wait five minutes.
4. Reconnect the USB link and diagnostic service tool.
5. Turn the ignition on and recheck for the fault code.

NOTE: If there are any battery Volta codes, fix those first. If the ECM has been programmed recently, clear codes, test drive, and release vehicle if they don’t come back.

PROBABLE CAUSES:
1. Powertrain Controller Area Network (PTCAN) harness.
2. ACM (computer) failure.
3. CPC (computer) failure.
4. Wiring between the CPC and the ACM.
5. ACM/CPC not getting voltage.

Categories DD13 EPA10 (2010-13), Detroit, DTC TRUCKS Tags 1231, 13, 2010, 9, Aftertreatment, Arriving, Code, Control, DD13, Detroit, EPA10, Fault, FMI, has, MCM, message, Module, Not, or, Received, SPN, Stopped

CAT ET 2021A (Caterpillar Electronic Technician) + Factory Password (1 PC )
CAT $65.00
Rated 0 out of 5
DOWNLOAD Paccar ESA Electronic Service Analyst 5.5.0 Diagnostic Software 2023
PACCAR $96.00
Rated 0 out of 5
CAT Password Recovery Tool for CAT ecm configuration files WINDOWS 10
CAT $20.00
Rated 0 out of 5
NAVISTAR DLB 2024 Diamond Logic Builder
Navistar $100.00
Rated 0 out of 5
VOLVO IMPACT 2022 V.9227 offline
Trucks software $110.00
Rated 0 out of 5

download Hitachi Construction Machinery MPDr Ver 3.7.0.0 [10.2020] Diagnostic Software
Hitachi $76.00
Rated 0 out of 5
Perkins EST 2022A ( 1 PC )
Perkins $86.00
Rated 0 out of 5
Thermo King EPC 2012
Thermo King $45.00
Rated 0 out of 5
CAT Engine Reprogramming Tool for flash programming C1.8, C2.4, C3.8 & C3.3B + Guide
CAT $50.00
Rated 0 out of 5
CLAAS MetaDiag 2007 Update 2016
CLAAS $200.00
Rated 0 out of 5
Navistar international OnCommand service information 2018 software trucks
Navistar $50.00
Rated 0 out of 5
Bobcat Service Library [03.2019] Service, Operator, Maintenance, Bulletines, etc full update
Bobcat $110.00
Rated 0 out of 5
Bendix Acom Pro 2022 v3 ( 1 PC ) BENDIX 2022 V3
Bendix $85.00
Rated 0 out of 5
Navistar Diamond Logic Builder 2023 (DLB)
Navistar $94.00
Rated 0 out of 5
PACCAR Engine Analyzer v1.3.0.6
PACCAR $55.00
Rated 0 out of 5
JOHN DEERE PARTS ADVISOR & HITACHI 2.24.2 [2023.07] EPC
Hitachi $125.00
Rated 0 out of 5
MAN MANTIS v666 EPC [09.2021] Spare Parts Catalog
MAN $80.00
Rated 0 out of 5
AGCO EDT 2023 Electronic Diagnostic Tool 1.125
AGCO $120.00
Rated 0 out of 5
Diamond Logic Builder DLB 2019 Database 2019
Navistar $50.00
Rated 0 out of 5
CAT CDVR PC Software – Caterpillar Digital Voltage Regulator (CDVR) WINDOWS 10
CAT $45.00
Rated 0 out of 5

SERVICE MANUAL International Engines DT466E & DT530E (1999 & Older)
INTERNATIONAL ENGINES $31.00
Rated 0 out of 5
SERVICE MANUAL DDEC VI SERIES 60 MCM EGR Engine Harness Schemati
DETROIT $15.00
Rated 0 out of 5
SERVICE MANUAL MACK E7
MACK $27.00
Rated 0 out of 5
SERVICE MANUALDAF xf xe engine manual
DAF $20.00
Rated 0 out of 5
SERVICE MANUAL Carrie Genesis R70 Genesis R90 Genesis TR1000 Multi -Temp
CARRIE $25.00
Rated 0 out of 5
Allison 1000 and 2000 Series Gen 4 (2005-11) Service manual
Allison $10.00
Rated 0 out of 5
SERVICE MANUAL BOBCAT 319 SMS
BOBCAT $49.00
Rated 0 out of 5
SERVICE MANUAL DETROIT DIESEL DDEC III – IV Master 2000 Training
DETROIT $25.00
Rated 0 out of 5
SERVICE MANUAL International Engines MaxxForce 5
INTERNATIONAL ENGINES $35.00
Rated 0 out of 5
SERVICE MANUAL Gen 1 – AutoSelect & AutoShift
EATON $25.00
Rated 0 out of 5