Cummins ISM CM875 (2003-06) Fault Code: 224 PID: S085 SPN: 1265 FMI: 3/3 Centinel? oil control valve circuit – shorted high. Open circuit or high signal voltage detected at Centinel? oil control valve circuit.
The Centinel? oil control valve, turbocharger control valve, and turbocharger control shutoff valve share the same return wire in the engine harness. If Fault Codes 224, 2355, and 2277 are all active, check the return ground terminal for a faulty ground connection.
Possible causes:
1)Open circuit in the engine harness, connectors, or Centinel? oil control valve.
2)Signal circuit shorted to a voltage source in the engine harness.
Possible repairs:
1)Replace the Centinel? oil control valve.
2)Replace the ECM.
3)Repair or replace the engine harness.
Related products
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1041 J1850 (Class 2) ABS Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0870 Transmission Pressure Switch Solenoid E Circuit
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1300 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00 -
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0123 Pedal Position Sensor Circuit High Voltage
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U0032 J1850 (Class 2) Serial Data Communication Link High
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U1064 J1850 (Class 2) TBC Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0122 Pedal Position Sensor Circuit Low Voltage
1000 & 2000 Gen 4 $50.00
