Cummins ISB4.5 CM2150 Fault Code: 3598 PID: SPN: 3360 FMI: 19 Aftertreatment Diesel Exhaust Fluid Controller – Received Network Data In Error.

Circuit Description
The aftertreatment diesel exhaust fluid controller is the central control for the aftertreatment diesel exhaust fluid dosing system, and handles the dosing activity, tank level sensing, tank temperature sensing, line heating, and tank heating. It communicates to the engine ECM via a J1939 data link connection.

Component Location
The location of the aftertreatment diesel exhaust fluid controller varies by application and OEM. The controller will typically be mounted to the vehicle frame or suitable rigid bracket using 3 or 4 capscrews. Refer to the OEM service manual for a more detailed component location description.

Conditions for Running the Diagnostics
This diagnostic runs continuously when the keyswitch is in the ON position.

Conditions for Setting the Fault Codes
The diesel exhaust fluid controller was expecting to see valid J1939 data link messages from the engine ECM, but the actual data received was unreadable or missing.

Action Taken When the Fault Code is Active
-The ECM illuminates the amber CHECK ENGINE lamp and/or the Malfunction Indicator Lamp (MIL) immediately when the diagnostic runs and fails.
-Diesel exhaust fluid injection into the aftertreatment system is disabled.

Conditions for Clearing the Fault Code
-This fault code can not be cleared with INSITE™ electronic service tool.
-This fault code will go inactive immediately when normal communication between the ECM and diesel exhaust fluid controller are restored.
-To validate the repair, start the engine and let it idle for 1 minute.
-The ECM will turn off the amber CHECK ENGINE lamp and/or MIL immediately after the diagnostic runs and passes.
-Use INSITE™ electronic service tool to verify the fault code is inactive.
-The inactive fault code will be cleared from the memory after 9600 hours of engine operation without a reoccurrence.

Possible Causes
-Malfunctioning engine ECM
-Corrupted engine calibration
-Malfunctioning diesel exhaust fluid controller
-Corrupted diesel exhaust fluid controller calibration
-Active fault codes for engine or aftertreatemnt sensors that provide inputs to the SCR system for dosing.