Cummins ISB CM850 (2003-06) Fault Code: 418 (Marine) PID: 97 SPN: 97 FMI: 15 Water-in-Fuel Indicator Data Valid but Above Normal Operational Range – Least Severe Level. Water has been detected in the fuel filter.
Cummins ISB CM850 (2003-06) Fault Code: 418 (Marine) PID: 97 SPN: 97 FMI: 15 Water-in-Fuel Indicator Data Valid but Above Normal Operational Range – Least Severe Level. Water has been detected in the fuel filter.
In automotive, industrial, and power generation applications, the water-in-fuel sensor is integrated into the fuel filter. It is automatically replaced whenever the fuel filter is replaced. For marine applications the sensor is not integrated into the fuel filter and is a serviceable item.
Possible causes:
1)Water in fuel
2)Damaged sensor
3)Fuel contamination.
Possible repairs:
1)Flush the dirt, debris, or moisture from the connector pins.
2)Replace the water-in-fuel sensor.
3)The removal and installation of the connector may correct the fault.
4)Replace the ECM.
Related products
-
-
-
-
-
-
-
Allison 1000 & 2000 Gen 5 Fault Code:P2761 TCC PCS Control Circuit Open
1000 & 2000 Gen 5 -
-
Allison 1000 & 2000 Gen 5 Fault Code:U0074 CAN Communications BUS 2 Off
1000 & 2000 Gen 5 -
-
-
Allison 1000 & 2000 Gen 5 Fault Code:P2764 TCC PCS Control Circuit Low
1000 & 2000 Gen 5 -
Allison 1000 & 2000 Gen 5 Fault Code:U0100 Lost Communication With ECM A
1000 & 2000 Gen 5 -
-
