Cummins ISB CM550 (1990-94) Fault Code: 377 PID: SID 233 SPN: 107 FMI: 7 Fuel Pump Power Relay Stuck-On
Circuit Description
This circuit is internal to the ECM. If the keyswitch is turned off and the ECM still detects
messages being sent from the fuel pump, the ECM will log this fault.
Component Location
This circuit logic is internal to the ECM.
Shop Talk
1) Some older ISB engines use a different original equipment manufacturer (OEM) interface
connector than illustrated.
2) Fault Code 377 can be caused by a stuck fuel pump relay. If voltage is detected at pin 7
of the fuel pump connector, with the keyswitch in the OFF position, check for a faulty fuel
pump relay.
Related products
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0218 Transmission Fluid Over Temperature Condition
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1301 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P2771 Four-Wheel Drive Switch Circuit
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P1688 Unmanaged Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1096 J1850 (Class 2) IPC Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P2773 Torque Control Request Ignored – ECM/TCM
1000 & 2000 Gen 4 $50.00 -
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0848 Transmission Pressure Switch Solenoid D Circuit High
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: U0031 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00
