Cummins ISB CM550 (1990-94) Fault Code: 363 PID: 251 SPN: 1076 FMI: 7 Fuel Pump Control Valve Feedback Error
Circuit Description
This circuit is internal to the fuel pump and detects fuel solenoid movement.
Component Location
The fuel pump is located on the backside of the gear housing on the intake side of the engine.
Shop Talk
No current inflection recognized within the solenoid closing time. This fault is typically set when a fuel pump beginning of injection point error is recognized at engine speeds greater than 700 rpm and commanded fueling greater than 20 mm3 [0.787 in3] for 2 seconds at battery voltage (greater than 9-VDC). The fault code can be triggered by electrical noise or voltage feedback on ground loop. Jump-starting a vehicle with 24-VDC can cause this fault code to be set.
Related products
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1301 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00 -
Bendix ABS EC-30 Fault Code: SID 251 FMI 3
Bendix ABS -
Allison 1000 & 2000 Gen 4 Fault Codes: U1064 J1850 (Class 2) TBC Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0122 Pedal Position Sensor Circuit Low Voltage
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P1688 Unmanaged Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P2771 Four-Wheel Drive Switch Circuit
1000 & 2000 Gen 4 $50.00 -
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: U0032 J1850 (Class 2) Serial Data Communication Link High
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P1779 Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
