CAT 3406E (Prefix 5DS or 1LW) Fault Code: 25 PID: 102 SPN: FMI: 4 Boost Pressure voltage low
The Engine Control Module (ECM) detects the following conditions:
•The signal voltage from the boost pressure sensor is greater than 4.95 VDC for more than two seconds.
•The ECM has been powered for at least two seconds.
•The engine is not running or the rack position is less than 50 percent with the engine retarder off.
Probable Causes:
1) ECM Connection/Harness
2) Crankcase breather plugged
3) Pressure sensor
4) Pressure sensor harness
5) ECM Failure
![download Hitachi Construction Machinery MPDr Ver 3.7.0.0 [10.2020] Diagnostic Software](https://www.ecuforcetruck.com/wp-content/uploads/2023/05/MPDR-3.7.00-300x300.png)
