Allison 1000 & 2000 Gen 5 Fault Code:P0604 Control Module Random Access Memory (RAM)
CIRCUIT DESCRIPTION:
The Transmission Control Module (TCM) performs an internal memory self-test at power up that writes and reads patterns at specific RAM locations to verify that all addresses and data lines are functioning correctly.
ACTION TAKEN WHEN THE DTC SETS:
1. The CHECK TRANS light illuminates.
2. DTC is stored in the TCM history on next key cycle.
3. The TCM returns to the boot program.
4. The TCM inhibits shifts to range.
CONDITIONS FOR CLEARING THE DTC/CHECK TRANS LIGHT
Replace TCM.
DIAGNOSTIC AIDS:
Replace TCM.
Related products
-
-
-
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P1779 Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P1688 Unmanaged Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0848 Transmission Pressure Switch Solenoid D Circuit High
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0122 Pedal Position Sensor Circuit Low Voltage
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0876 Transmission Reverse Pressure Switch Circuit Stuck Open
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P0870 Transmission Pressure Switch Solenoid E Circuit
1000 & 2000 Gen 4 $50.00 -
