PACCAR MX (2004 Emissions) Fault Code: U1794 CAN Communication – Message (PROPB_AST) not Available, Clutch Percent Torque from Transmission System
PACCAR MX (2004 Emissions) Fault Code: U1794 CAN Communication – Message (PROPB_AST) not Available, Clutch Percent Torque from Transmission System
SET CONDITIONS:
This DTC is set when a CAN message is received correctly, but the content (signal value or status) is not available.
DIAGNOSTIC CONDITION:
The diagnostic runs continuously when the ignition is keyed on.
CORRESPONDING OBD READINESS MONITOR:
None
RESET CONDITION:
The DTC changes to inactive after the diagnostic runs and passes.
REPAIR VERIFICATION:
1. Clear all DTCs.
2. Test drive or operate the vehicle to meet the diagnostic conditions and set conditions.
3. Did the DTC come back?
– No, repair successful
– Yes, repair unsuccessful
POSSIBLE CAUSES:
A malfunction in the system from which the message originates
![Volvo Penta EPC 6 Offline VMware [12.2021] VMware](https://www.ecuforcetruck.com/wp-content/uploads/2022/11/VOLVO-PENTA-2021-A-300x300.jpg)
