Cummins ISL CM850 (2003-06) Fault Code: 2558 PID: SID 57 SPN: 697 FMI: 4 Auxiliary PWM Driver #1 – Voltage Below Normal or Shorted to Low Source. Low signal voltage detected at the analog torque circuit.
Cummins ISL CM850 (2003-06) Fault Code: 2558 PID: SID 57 SPN: 697 FMI: 4 Auxiliary PWM Driver #1 – Voltage Below Normal or Shorted to Low Source. Low signal voltage detected at the analog torque circuit.
Possible causes:
1)A faulty transmission shift modulator
2)An short circuit to ground on the output device driver line
3)A short pin to pin in the output device driver line.
Possible repairs:
1)Replace the transmission shift modulator.
2)Repair or replace the OEM harness.
3)The removal and installation of the connector may correct the fault.
4)Replace the ECM.
Related products
-
-
-
-
-
-
-
Allison 1000 & 2000 Gen 5 Fault Code:U0100 Lost Communication With ECM A
1000 & 2000 Gen 5 -
Allison 1000 & 2000 Gen 5 Fault Code:U0074 CAN Communications BUS 2 Off
1000 & 2000 Gen 5 -
-
-
Allison 1000 & 2000 Gen 5 Fault Code:U0073 CAN Communication Bus 1 Off
1000 & 2000 Gen 5 -
-
-
-
Allison 1000 & 2000 Gen 5 Fault Code:P2763 TCC PCS Control Circuit High
1000 & 2000 Gen 5
