Volvo All Engines (2017 Emissions) Fault Code: P064200 PID: EMS Sensor Reference Voltage “A”
Volvo All Engines (2017 Emissions) Fault Code: P064200 PID: EMS Sensor Reference Voltage “A”
An analog signal from the accelerator pedal is used to indicate a percent value of the accelerator pedal position. The signal is monitored by the Vehicle Electronic Control Unit (VECU) and communicated to the Engine Control Module (ECM) via the J1939 data link. Based on the signal, the ECM will request a certain engine torque. If the analog signal is too low or too high, the ECM instead uses the digital signal from the accelerator pedal’s idle validation switch to enable driving in limp home mode.
Conditions for diagnostic trouble code (DTC):
1) The electronic control unit (ECU) registers a voltage supply that is lower than 4.7 V
2) A17:PB10
Observable symptoms
1) The engine does not respond when accelerator pedal is pressed.
Probable cause
1) Accelerator pedal
2) Supply wire, Short circuit to lower voltage
3) Supply wire, Short circuit to ground
-
JOHN DEERE SERVICE ADVISOR 5.3.225 DATABASE AG + CF ENGLISH 2023
John Deere $250.00Rated 0 out of 5 -
Navistar international OnCommand service information 2018 software trucks
Navistar $50.00Rated 0 out of 5
-
JOHN DEERE SERVICE ADVISOR 5.3.225 DATABASE AG + CF ENGLISH 2023
John Deere $250.00Rated 0 out of 5 -
International Truck ISIS – Oncommand Service Information Q4.2020 [04.2020]
Navistar $85.00Rated 0 out of 5 -
Wabco ToolBox plus 13.7.0.1 + ECAS CAN2 v3.00 Diagnostics Software
Trucks software $84.00Rated 0 out of 5 -
download MANCATS II v14.01 2014 Diagnostic software MAN CATS ( virtual machine )
MAN $75.00Rated 0 out of 5 -
download Hitachi Construction Machinery MPDr Ver 3.7.0.0 [10.2020] Diagnostic Software
Hitachi $76.00Rated 0 out of 5
Related products
-
Volvo All Engines (2004 Emissions) Fault Code: PID 412 FMI 0 EGR Temperature After Cooler
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: PID 105 FMI 4 Boost Air Pressure / Temperature Sensor
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: PID 412 FMI 9 EGR Temperature After Cooler
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: SID 146 FMI 7 EGR Control Valve
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: SID 146 FMI 5 EGR Control Valve
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: SID 21 FMI 2 Cam Speed Sensor
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: PID 228 FMI 11 Calibration Factor
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: PID 252 FMI 9 Date Data Failure
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: PID 108 FMI 4 Ambient Pressure Sensor
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: PID 49 FMI 9 ABS Status
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: PPID 35 FMI 5 EGR Mass Flow Sensor
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: PID 50 FMI 9 AC System Status
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: PID 412 FMI 4 EGR Temperature After Cooler
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: PID 102 FMI 2 Boost Air Pressure / Temperature Sensor
All Engines (2004 Emissions)Rated 0 out of 5 -
Volvo All Engines (2004 Emissions) Fault Code: PID 158 FMI 4 Battery Voltage
All Engines (2004 Emissions)Rated 0 out of 5
-
SERVICE MANUAL International Engines MaxxForce DT 9 10 (2010-2013)
INTERNATIONAL ENGINES $20.00Rated 0 out of 5