CAT 3406E (Prefix 5DS or 1LW) Fault Code: 46 PID: 100 SPN: FMI: 11 Very Low Oil Pressure
The Engine Control Module (ECM) detects the following conditions:
• Oil pressure drops below factory limits for more than 8 seconds
Probable Causes:
1) Low oil level
2) Low oil pressure sensor
3) Low oil pressure sensor harness
4) If codes also active for barometric, atmospheric pressure, or boost pressure, repair those first
5) Verify 5V to all pressure sensors
6) Manually check engine for oil pressure to verify sensor is performing correctly
7) ECM connection/harness
![download Hitachi Construction Machinery MPDr Ver 3.7.0.0 [10.2020] Diagnostic Software](https://www.ecuforcetruck.com/wp-content/uploads/2023/05/MPDR-3.7.00-300x300.png)
