Detroit DD16 GHG14 (2014-16) Fault Code: SPN 5395 FMI 15 (MCM) Idle Fuel Quantity Out of Range
DESCRIPTION:
Fuel quantity above normal operating range at idle.
MONITORED PARAMETER:
Injector quantity
TYPICAL ENABLING CONDITIONS:
Engine idle and no vehicle speed.
MONITOR SEQUENCE:
None
EXECUTION FREQUENCY:
Continuous when enabling conditions met.
TYPICAL DURATION:
Two minutes
DASH LAMPS:
MIL
ENGINE REACTION:
No derate
VERIFICATION:
Steady engine idle: Two minutes.
NOTE: If any other codes are active, fix those first.
PROBABLE CAUSES:
1. Intake manifold pressure sensor.
2. Intake manfiold pressure sensor connector/harness.
3. Failed EGR delta p sensor.
4. EGR delta p sensor connector/harness.
5. EGR Cooler failure.
6. Inspect the entire exhaust system for leaks, including the EGR system.
7. Inspect the entire air intake system for leaks, including the charge air cooler.
8. Perform stationary regen.
![JOHN DEERE PARTS ADVISOR & HITACHI 2.24.2 [2023.07] - ECUFORCETRUCK EPC](https://www.ecuforcetruck.com/wp-content/uploads/2023/09/1-300x300.png)
Related products
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P1688 Unmanaged Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1064 J1850 (Class 2) TBC Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P2773 Torque Control Request Ignored – ECM/TCM
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0848 Transmission Pressure Switch Solenoid D Circuit High
1000 & 2000 Gen 4 $50.00 -
Allison 1000 & 2000 Gen 4 Fault Codes: P1779 Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1096 J1850 (Class 2) IPC Controller State of Health Failure
1000 & 2000 Gen 4 $50.00 -
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P2771 Four-Wheel Drive Switch Circuit
1000 & 2000 Gen 4 $50.00
