Detroit DD13 GHG14 (2014-16) Fault Code: SPN 2659 FMI 0 (MCM) Exhaust Gas Recirculation Flow Target Error Diagnostic – High Flow
DESCRIPTION:
This fault code sets when the difference between the actual EGR flow and the commanded EGR flow is higher than a calibrated threshold.
MONITORED PARAMETER:
EGR Mass Flow
MONITORED PARAMETER:
EGR Flow
TYPICAL ENABLING CONDITIONS:
1. CAC greater than 0°C (32°F).
2. Engine Speed 1080 to 2500 rpm.
3. Coolant Temperature Greater than 65°C (149°F).
4. Ambient Temperature Greater than -8°C (18°F) Ambient.
5. Barometric Pressure Greater than 755 mbar (11 psi).
MONITOR SEQUENCE:
None
EXECUTION FREQUENCY:
Always enabled
TYPICAL DURATION:
20
DASH LAMPS:
1. MIL
2. CEL
ENGINE REACTION:
Engine Derate
VERIFICATION:
1. Start engine.
2. Warm up such that coolant temperature greater than 65°C (149°F).
3. Ensure ambient temperature greater than -8°C (18°F).
4. Ambient Barometric pressure greater than 755 mbar (11 psi).
5. Road Test the Vehicle While Keeping the rpm Between 1080 and 2500.
PROBABLE CAUSES:
1. EGR delta p sensor.
2. EGR delta p harness/connector.
3. EGR delta p sensor port.
4. EGR valve.
Related products
-
-
-
-
-
Allison 1000 & 2000 Gen 4 Fault Codes: P0870 Transmission Pressure Switch Solenoid E Circuit
1000 & 2000 Gen 4 $50.00 -
-
Allison 1000 & 2000 Gen 4 Fault Codes: U1301 J1850 (Class 2) Serial Data Communication Link Low
1000 & 2000 Gen 4 $50.00 -
-
Bendix ABS EC-30 Fault Code: SID 251 FMI 3
Bendix ABS -
Allison 1000 & 2000 Gen 4 Fault Codes: P1779 Engine Torque Delivered To TCM Signal
1000 & 2000 Gen 4 $50.00 -
-
-
-
-
